• LAMINATOR FOR METALLURGY
    -

    Manually-adjustable laminators, semi-automatic models for more regular volumes, Fully automatic machines for large volumes.

    Metallurgy laminator somerra

AUTOMATIC LAMINATOR

TX SERIE


The hight precision in a compact machine.
Automatic machine with panel edge cutting.



The new TX series of laminators incorporated the latest technologies developed by SOMERRA to allow perfect application and integrate an automatic panel edge film cutting with high productivity

TECHNICAL CHARACTERISTICS:

Construction on metal sheets frames thickness 15mm (0,6").
Protecting carters with access doors on control equipment.
2 Self-blocking unwinding chucks on the top.
Adjustable braking of the film coil unwinding.
Applying steel roller with grinded neoprene coating, according to a certain profile.
Hardness suited to your product.
Mounting on scaled rolling bearings.
Positioning control for application by pressure cylinders. Adjustable and visualised bearing pressure.
Deviation film steel rollers. Mounting on scaled rollers.
Automatic film strength management.
Set driving by brushless motor.
Control panel has touch screen.
Cell to detect the presence of a part.

SEMI-AUTOMATIC FILM COATING-MACHINE

TS SERIE


The simplicity and robustness.



With their welded structure almost « indestructible », the TS series of laminators allows use safely for a long time and with every little maintenance, single or double sided.

TECHNICAL CHARACTERISTICS:

Construction on metal sheets frames thickness 15mm (0,6").
Protecting carters with access doors on control equipment.
1 Self-blocking unwinding chucks on the top (possible 3).
1 self- blocking unwinding chuck on the bottom.
Adjustable braking of the film coil unwinding.
Applying steel roller with grinded neoprene coating, according to a certain profile.
Hardness suited to your product.
Mounting on scaled rolling bearings.
Positioning control for application by pressure cylinders. Adjustable and visualised bearing pressure.
Deviation film steel rollers. Mounting on scaled rollers.
Control panel has touch screen.
Starting by means of a treadle.

AUTOMATIC LAMINATOR

TA SERIE


High productivity, to apply doubled-sided.
Automatic machines with panel edge film cutting.



The TA series machines can be integrated into your production lines, coupled with the sets of loading and unloading SOMERRA, they will ensure you maximum productivity with a minimum of operators.

TECHNICAL CHARACTERISTICS:

Construction of steel sheet 15mm (0,6") thick.
Carters’ protection with access control devices doors.
Bearing supports chuck nylon.
Three mandrels coil support locking flanges film with lateral holding of the coil. (a core service and two standby).
Adjustable braking of unwinding of the reel of film system by electromagnetic powder brake.
Fine tuning of the overlay film over the product to be protected by knurled adjustment knob.
Deviation film galvanized steel roller, mounting with sealed bearings.
Steel roller feeder and roller ejector with neoprene coating hardness for your product.
Lower rollers mounted on bearings equipped with sealed bearings.
Upper rollers mounted on bearing slides equipped with sealed bearings.
Control automatic positioning of upper rollers by pneumatic cylinders.
Positioning stop the introduction of the product, by controlled retractable stop air cylinder. Automatic operation.
Rollers applicators steel with neoprene coating rectified following a certain profile. Appropriate hardness to protect products.
Control of Mechanical positioning indicated position on mechanical counter. Application by pneumatic cylinders. Contact pressure on the product displayed and adjustable.

SEMI-AUTOMATIC FILM COATING-MACHINE

TS650


The ultra compact.
Semi-automatic laminator for small formats.



Mounted on casters, with a small footprint, the TS 650 is ideal for laminating small formats up to 650mm wide single or double-sided..

TECHNICAL CHARACTERISTICS:

Construction on metal sheets frames thickness 15mm (0,6").
Protecting carters with access doors on control equipment.
1 Self-blocking unwinding chucks on the top (possible 3).
1 self- blocking unwinding chuck on the bottom.
Adjustable braking of the film coil unwinding.
Applying steel roller with grinded neoprene coating, according to a certain profile.
Hardness suited to your product.
Mounting on scaled rolling bearings.
Positioning control for application by pressure cylinders. Adjustable and visualised bearing pressure.
Deviation film steel rollers. Mounting on scaled rollers.
Assembly driven by a motor-reducer with alternating current.
control panel has touch screen.
Starting by means of a treadle.
Cell to detect the presence of a part.

MANUAL LAMINATOR

TM SERIE


The economical solution.
Machine with manual setting.



The TS range is the simplest and most economical laminator for small volumes while maintaining an optimal quality of film application.

TECHNICAL CHARACTERISTICS:

Construction on metal sheets frames thickness 10mm (0,4").
Protecting carters with access doors on control equipment.
1 Self-blocking unwinding chucks on the top.
1 self- blocking unwinding chuck on the bottom.
Adjustable braking of the film coil unwinding.
Applying steel roller with grinded neoprene coating, according to a certain profile.
Hardness suited to your product.
Mounting on scaled rolling bearings.
Positioning control for application by wheel.
Mechanical pressure downforce Product.
Deviation film steel rollers. Mounting on scaled rollers.

CONVEYING, PALETTISATION.

In order to ensure that our solutions are integrated seamlessly into your production lines, we offer to use our expertise in conveying products (sheet metals, profiles and more) after the application of protective film.

X

John Downie
P.O. Box 274
Bogart, GA 30622 USA

678-753-1295 Office
678-995-6820 Cell

Howard Jones
Automated Cutting Room Services Ltd,
6 Marlowe Court
Shropshire SY13 1QR - UK

Mob: +44 (0)7770 475227
Tel: +44 (0)1948 666270

ASIDUIM
1 rue Louis Lachenal, 69740 Genas FRANCE

Tel: +33 (0)4 78 48 11 44
Fax: +33 (0)4 78 48 11 45

Jim Broomhall
Aeronaut Automation,
4-6 Tepko Road Terrey Hills, NSW 2084 - AUSTRALIA

Phone: +612 9450 0800
Fax: +612 9450 047727

Other, Export: