PA200
TECHNICAL CHARACTERISTICS:
Construction of steel sheet 15mm (0,6") thick.
Carters’ protection with access control devices doors.
Presser entry, consisting of :
- Vertical rollers and motorized rubberized allowing the introduction of the profiles in the machine. Adjustable air pressure and displayed.
- Horizontal support rollers, 50mm (2") diameter PVC mounted on spring axis.
- Horizontal rubber roll, pneumatic rise and descent, individually adjustable pressure and displayed on gauge.
- Piece presence detection by photocell.
Laminating Machine :
- Consisting of 4 application heads independently adjustable.
- Rollers applicators coated Neoprene rectified rubber hardness adapted to the product. Micrometric adjustment for perfect film overlay on the profile.
- Detour roller mounted on sealed bearings.
- Manual setting of 4 lamination heads and at depth, identifying positions by index.
Automatic cutting by heating wire.
Output presser, consisting of:
- Vertical rollers and motorized rubberized allowing the introduction of the profiles in the machine. Adjustable air pressure and displayed.
- Horizontal support rollers, 50mm (2") diameter PVC mounted on spring axis.
- Horizontal Roll rubber, pneumatic rise and descent, individually adjustable pressure and displayed on gauge.
- Piece presence detection by photocell.
Directional foam coated roller to finish the applications on the rounded parts right and left.
Low voltage control panel, automatic cycle managed by SIEMENS PLC.
Getting Started (cycle start) by treadle.
Manual Feed.
Automatic evacuation.
4 sided lamination possible.
Automatic Cutting.
Profiles Dimensions :
- Maximum length: 7000mm (276").
- Maximum width: 350mm (14").
Adjustable speed:
- Mini: 2m / min.
- maxi: 40m / min.
Film coil Capacity:
- Chuck for 76mm (3") inner diameter cardboard tube.
- Mini: Diam 80mm (3").
- Maxi: Diam 200mm (8").
No motorized conveyor input:
- Length: 7500mm (295").
- Width: 300mm (12").
- PVC rolls 50mm (2") diameter, spring axis.
- Welded frame.
- Height of work surface: 970mm (38").
- Construction of 2 parts.
Motorized exit conveyor + pneumatic pusher:
- Length: 7500mm (295").
- Width: 300mm (12").
- PVC rolls 50mm (2") Diam.
- Engines by motorcycle gear power: 1kw.
- Belt transmission.
- Cell and limit stop.
- Pneumatic plungers for discharging the protected profile on the output accumulation table.
Motorized evacuation Table: Output of choice (right or left).
Fabricated Structure dismantled (transport).
- Length: 7000mm (276").
- Width: 2000mm (80").
Transportation of profiles by adherent belts, drive by gear motor, lead managed by cells.
Machine complies with the provisions of Directive Machines 2006/42/EC